Author Archives: Author

What is done during HVAC maintenance?

HVAC system in need of maintenance

How long does HVAC maintenance take?

Are you ready for summer? Vacation plans made, swimsuits packed, and all of those essential things? What about your HVAC? Is it ready for the summer? Yes, your HVAC system has been running fine all winter, but the AC part of it hasn’t. Before you head to the airport or pack the camping gear, maybe get a professional residential HVAC maintenance check-up.

The average time is one to two hours if there are no issues. Each HVAC maintenance business has its own residential HVAC maintenance checklist that their technicians are trained and instructed to follow. If the unit needs any service performed, that can extend the time needed to complete the inspection and maintenance. The basic checklist of most residential HVAC maintenance contractors will include any or all of the following:

  • Check refrigerant
  • Test for leaks
  • Evacuate system and capture released refrigerant
  • Check air duct for breaks or leakage
  • Measure evaporator coil airflow
  • Verify the electric control sequence
  • Inspect electric terminals, clean, tighten connections, use a non-conductive coating
  • Oil any motors, check belts
  • Check thermostat accuracy

What maintenance does a central air conditioner need?

The above professional maintenance check should be scheduled twice a year. During the summer months, a homeowner should perform the following:

  • The Filter – This should be replaced or cleaned every 30 days all year long. Filters that are clogged and dirty will reduce the efficiency of the system and what air gets through the dirty filter is blowing into the duct system and throughout the house. Regular changing or cleaning of this filter will keep your system running well in between professional residential HVAC maintenance appointments. 
  • The Coils – The condenser coil and evaporator coil collect dirt while the HVAC air is working. Keeping the filter changed or cleaned as mentioned above will help minimize how much dirt. When the evaporator coil collects dirt, it insulates it and keeps it from absorbing heat as intended. This is one area a professional residential HVAC maintenance check-up includes. 

Besides the inside portion of your HVAC system, the outdoor unit needs your attention. Make sure nothing is blocking it from getting air such as shrubbery, grass, or trash that has blown up to it. Check it weekly to make sure it is clear of any debris. 

  • The Coil Fins – The condenser coils and evaporator coils are aluminum fins that are bent easily. When bent, the airflow is blocked. During your scheduled professional residential HVAC maintenance, the technician will correct this, but in between those appointments, you can purchase a fin comb at any home improvement store and do this yourself following the instructions on the package. 
  • Condensation Drains – If these become clogged, it can cause a lot of problems to the HVAC system and your home’s structure. Each month when you change or replace the air filter, take a stiff wire and push through the drain to make sure it isn’t clogged.  This is another area that the technician will check and clean during your professional residential HVAC maintenance appointment. 

How often should you have HVAC maintenance?

Experts recommend having a professional residential HVAC maintenance and inspection twice a year, once in the fall and again in the spring, and should not be less than once a year in the spring. Even if your HVAC system is operating perfectly, these inspections and maintenance will keep it running perfectly.

Most HVAC service companies offer HVAC residential maintenance contracts at an inexpensive rate. However, regardless of the cost, professional preventive HVAC maintenance is a good investment to get the longest lifespan possible from your unit. 

HVAC system with sprinklers in yard

Are HVAC maintenance plans worth it?

Ultimately, the biggest benefit of having a preventive maintenance plan is that it will keep your unit in reliable condition. When things are in reliable condition, they are less likely to break down, leaving you hot on a summer day or frozen on a winter night. For the sake of review, here are the points in favor of having a residential HVAC maintenance contract with a professional HVAC company: 

  • The decrease in equipment downtime
  • Reduced major repairs, saving money
  • Improved life expectancy
  • Reduced need to replace HVAC unit
  • Improved health and safety for household
  • Adds to the value of a home, especially when you take a transferable contract

When a residential HVAC maintenance is implemented properly, it will result in savings from countless repair calls or replacing parts, or the whole system. Your home is a large investment and the HVAC system is an investment within that investment. Taking care of things like the HVAC system, the roof, and other major components will keep your home comfortable and healthy for you and your loved ones, all making it worthwhile to have a residential HVAC maintenance program on the important components like the HVAC. Call (530) 223-1332 today for your HVAC maintenance needs in Redding, CA.

What is HVAC Repair?

Young Man Repairing Air Conditioner Standing On Stepladder

Learn More About HVAC Repair

Your HVAC unit and systems will undergo many changes as time passes, as a matter of fact, there will be times that HVAC repair will be necessary in order for your systems to continue to operate smoothly. When there are issues with your HVAC it would be ideal to contact a service professional for help in connection to a qualified HVAC company. There are many specifics found with each unique HVAC system that requires certain protocols to be met in handling it. That’s why it’s important to have a professional service the machine that knows how to work with it. HVAC repair can be a delicate matter, learn a little more about it here before you start on services.

What is the meaning of HVAC?

HVAC stands for heating, ventilation and air conditioning. Essentially HVAC systems comprise of indoor and outdoor units, furnaces, ACs and other units that will provide heating and cooling to properties. HVAC systems are an industry-standard in all property constructions be they for residential or commercial purposes.

How much does it cost to service an HVAC?

An HVAC repair or other services can cost around $150-$450 on average. Most homeowners will spend around $268 on furnace services and $319 on AC services. An HVAC contractor, in turn, can charge hourly rates of $100-$150 and some may even have service call fees from $39-$200 which applies to the first hour.

How often should central air be serviced?

Your central air should be serviced depending on your system’s requirements. At a minimum, it should be serviced once a year yet if you’d like to go for more in-depth care it can have periodic inspections up to 4 times a year.

What does an AC tune up include?

An AC tune-up will commonly include cleaning condenser coils, looking for leaks, tightening and examining electrical parts, checking refrigerant levels, analyzing operations of the motor and blower belt, and calibrating the thermostat.

How often should HVAC ducts be cleaned?

Your HVAC ducts should be cleaned every 3-5 years according to the National Air Duct Cleaners Association. Homeowners should also consider cleaning it every 2-5 years depending on their circumstances according to air duct professionals. 

HVAC technician checking capacitor on air conditioner

Do all AC units have a reset button?

Most AC units will have a reset button on them that are typically red in color and fairly small in size. It will be marked clearly as a reset button as well, however, if you have your doubts your instruction manual should be able to let you know where the reset button is.

How do I reset my air conditioning unit?

  • Shut Down Your AC at the Thermostat
  • Find Your Circuit Breaker Box
  • Reset the Circuit Breaker for Your AC Unit
  • Wait 30 Seconds
  • Turn the AC Thermostat Back On

Why would my outside AC unit stop working?

Reasons as to why your outside AC unit has stopped working can be due to outside fan failures which point towards issues with a bad capacitor. Without this part working properly your AC won’t be able to be powered which means that fans can’t spin. If your fans aren’t turning on than address the capacitor, with other issues consider doing more research or calling for help.

What is the life expectancy of a HVAC system?

The life expectancy of an HVAC system is about 15-20 years yet many people tend to replace them at around 10-15 years. An HVAC can run a long life with proper maintenance which can be more economical in terms of energy bills and maintenance fees.

How many types of HVAC are there?

There are four main types of HVAC systems out there yet there are others that can be of interest. These four are considered hybrid systems, split systems, packaged heating and air systems, and duct-free systems. There are advantages and disadvantages to each type of HVAC system and knowing these factors can help in the decision making the process of what works for you.

Get The Help You Need With an HVAC Company

When your HVAC starts to act up it can be hard to determine what areas need to be fixed. Oftentimes parts can influence the performance of connecting parts so issues can begin to blur. With a thorough inspection from a professional, problem areas can be tackled correctly without confusion. If you need help with an HVAC repair get in touch with your local HVAC company for assistance. An HVAC technician will be able to thoroughly inspect your unit to determine what could be happening with it. Proper HVAC repair can prevent the constant need to readdress an issue that’s been happening repeatedly. Get cost-effective and timely HVAC repairs with the assistance of a qualified HVAC company, learn about your various options today.

When you need help with HVAC repair in Redding, CA call (530) 223-1332 with Redding Heating & Air! 

How can we save energy in winter?

radiator by a bench

What should you set your thermostat in the winter?

Saving energy in the wintertime can be a very important task.  Some places get very chilly and you may want to turn your thermostat up as high as you can in order to combat the cold.  Fortunately, there are other things that you can do in order to make sure your house is warm in the wintertime, besides costing yourself an arm a and a leg.

Did you know that there is a certain temperature your thermostat should be set to in the wintertime?  A lot of people are unsure, and they ask questions like what temperature their thermostat should be set at, or how cold they can keep it in their house during the winter.  During the winter months, you should not let the temperature of your house fall below 70 degrees and your thermostat should never bet set any lower than 64 degrees.

The best temperature to save energy in winter

One of the best ways to save energy in the wintertime is to set your thermostat temperature to 68 degrees when and leave it alone when you’re in the home.  When you’re away from home lower it to 64 degrees but no lower.  This will ensure that your house stays the proper temperature but will also ensure that your thermostat is not consistently kicking on and costing you money.

Why is my electric bill so high in the winter?

You might be asking yourself; “why is my electric bill so high in the winter?”  This is because your thermostat is making your furnace turn on and off according to the temperature in your home.  The higher the temperature your thermostat is set, and the colder it is outside, the more your furnace will work.                      

What uses the most electricity in your house?

Believe it or not, there are some things that use more electricity than others in your home.  Everything in your home that is plugged into an outlet uses electricity, even if it is not plugged into something.  Leaving a cellular phone charger plugged into your wall without a cellular phone plugged in, still uses electricity.  Unfortunately, the average home electricity usage is mainly used on, you guessed it, heating and cooling.   In fact, here is the list of the average household electric usage:

  • Cooling and heating: 47% of energy use
  • Water heater: 14% of energy use
  • Washer and dryer: 13% of energy use
  • Lighting: 12% of energy use
  • Refrigerator: 4% of energy use
  • Electric oven: 3-4% of energy use
  • TV, DVD, cable box: 3% of energy use
  • Dishwasher: 2% of energy use

How can I save on my electric bill?

Most people know that their electric bill gets higher in the winter, but a lot of people are unsure of how to save themselves money in the wintertime.  There are options that you have to lower the cost of your heating and cooling bill, beyond just keeping your thermostat at a certain temperature.  In fact, there is a list of options that you have to improve your household heating to save yourself money in the long run:

  • Get new windows – Some people have older windows that let air in.  Getting new windows can stop the flow of cold air coming in and warm air getting out.
  • Put plastic over your windows – Even new windows can get leaks and let air in.  Sometimes putting plastic over your windows will help to keep heat in.
  • Make sure doors have seals – Sometimes the seals on your doors can wear.  You should always make sure your seals on your doors are intact.
  • Place towels or air stoppers at the bottom of doors – This can prevent airflow and leakage from the bottom of door frames.
  • Replace your roof – Believe it or not, your roof can also work against the airflow in your home.  Check with a company that does premium roofing in order to get your roof inspected and repaired if needed.
  • Get your furnace serviced – Everyone thinks that you only need to repair your furnace if it breaks down, but there is a lot more to caring for your furnace than you could imagine.  If you do not know much about furnace care and repair then call a company that deals with energy savings.
comfy feet in socks by a fire

Save energy this winter

There are many ways that you can save energy and money over the winter months.  Some of them are costly and some of them are cheap.  No matter which options you choose all will save you money, though the more costly options will save you year after year, rather than for one winter.  Employing every single method that we discussed here is your best option for saving the most energy and money during the winter months that you could hope for. Need heater maintenance in Redding, CA? Call (530) 223-1332 today!

How Do You Tell If Your House is Well Insulated?

A Technician Installs Insulation.

How do you tell if your house is well insulated?

If your home isn’t well insulated, no matter how finely tuned your HVAC system is, your home won’t stay properly heated in the winter or cool in the summer. New insulation installation may be required, otherwise energy gets wasted and your energy bills begin to skyrocket. Increased energy bills, indeed, are one way to tell your home may not be well insulated.

Other signs you need more insulation include:

  • Uneven temperatures throughout your house: You may find you have colder rooms in one part of the house, while others are warmer.
  • You have cold walls, floors or ceilings: If you have enough insulation, your walls, ceilings and floors will feel warm and dry.
  • Drafts: In the winter you might find air is getting in or going out through under-insulated windows and doors.
  • Pests like mice and bugs are getting inside: If pests are getting inside, so are drafts, and they are often getting in through doors and windows that need extra insulation.
  • Leaks in the attic: Poor insulation will allow water to get inside the attic.
  • Pipes freezing: If you have poor insulation, when it drops below freezing, there’s a better chance your pipes will freeze.

If you are experiencing problems like these in your home, you may need more insulation. When you want reliable insulation installation in Redding, CA, get in touch with the professionals at Redding Heating & Air. Find out how we can help you by calling (530) 223-1332.

What is the best insulation for a new home?

When insulating a new home, you’ll have many things to consider, including where to insulate and the recommended R-values for each area. R-value measures the insulation’s ability to resist conductive heat flow. The higher the R-value, the more effective the insulation. While less expensive insulation like batting have high R-values, you’ll have to install thicker layers that can cost more and be inconvenient or impractical. Climate will also affect the type of insulation you install, but in most areas you’ll want to put in both cavity insulation as well as insulated sheathing with R-values ranging from R-15 to R-21. You might also want to consider products like structural insulated panels that provide both structural support and insulation. In warmer climates you may want to consider roof radiant barriers, reflective insulation, and foundation insulation.

How should insulation be installed?

If you plan to install insulation yourself, you’ll probably use rolled paper-faced batting, which is best for floors and ceilings, as well as roofs with long joists or rafter ball or tall walls. Insulation installation is relatively easy. Below are some basic tips to install insulation.

Insulation installation tips

  • Begin by cutting the roll to fit the framing cavity’s length.
  • For walls you’ll fit the insulation into the cavity from the top or from one end for ceilings, floors or roofs. Do not force the insulation into the cavity. Instead, gently push it inside.
  • Fold the paper flange on one side of the cavity and staple it with staples space about a foot apart. Do the same for the other side.
  • Peel the insulation apart to make two layers to insulate behind pipes or wiring.

Can I put insulation over wiring?

When installing insulation around wiring, extra care has to be taken. You have to fill the space around the wires, but you cannot just shove the insulation against the wires. Otherwise you’ll have an uninsulated gap behind the wires. One option is to slit the insulation in the back to the depth and height of the wires, and then fit the wires into the slit when the insulation is installed. A second option is to separate the insulation’s layers and slide it under or over the wires, or put one layer over the wires and the other and one over it. 

Insulation installation in attic

Insulation installation will vary depending on whether the attic is finished or unfinished. When you’re insulating an unfinished attic, the objective is to seal the attic from the main living space. You’ll want to fill all of the area between and over the floor joists, including the attic hatch. In addition, you’ll insulate any duct work so heat loss and gain will be reduced.

If the attic is finished out as a living space, the insulation will be installed between the ceiling rafters and exterior wall studs. The floors can remain uninsulated. With a finished attic you can either remove the drywall or paneling covering ceilings and walls to install the insulation or you can drill holes between the studs and rafters to blow in insulation. You can also add insulation whenever you replace your roof. 

You may have to replace attic insulation that’s been damaged by a roof leak. If you have a roof leak or other roof damage, a roofing professional might be able to give you roof insurance claims assistance so you get full benefit of your claim.

Insulation installation in walls

If you have an older home, it’s possible the walls are not insulated, which can put a strain on your HVAC system. More often than not, however, you’ll have to remove the drywall if you plan  to install insulation in the walls, especially if the insulation is traditional roll insulation. You do have other options, including installing injection foam or loose-fill insulation. While you won’t have to remove all the drywall, you will have to open holes in the wall that will need to be patched later on. Some insulation like loose-fill insulation may settle over time, which causes hollow spaces.

How much does it cost to have insulation installed?

Costs will vary on insulation installation. Much will depend on the type of insulation you use. Blow-in insulation will cost around $500, for instance, if you do-it-yourself, and anywhere between $1,500 and $2,000 for a professional to tackle an average 1,500 square-foot home. Fiberglass batts are the most common insulation used and costs about $0.64 to $1.19 per square foot, so for 500 square feet you could spend up to $200 to do it yourself or as much as $500 to have a professional install it. You also have the option of installing spray foam insulation, which comes in two styles, either open cell or closed cell. Open-cell costs about $0.35 to $0.55 per board foot, while closed cell costs $1 to $2 per board foot.

A Technician Sprays Insulation in Attic.

Insulation installation near me

When you need new insulation in your home, you can rely on the professionals at Redding Heating & Air for expert insulation installation in Redding, CA. We offer a full range of HVAC services. Give us a call at (530) 223-1332 to find out how we can help you.

How Thermostat Works

Smart Screen on Wall of Modern Living Room

Learn More Regarding Thermostats

Your thermostat is an essential part of your property that will regulate the settings of your heating and cooling systems. Nowadays they come in various options that allow for easier adjustments, programming, and schedules. It’s essential to keep your thermostat well maintained so there are no system interruptions in on and off settings or more in-depth issues such as faulty wiring. What’s more, there have been many upgrades to thermostat systems that can leave you wondering what thermostat to buy. Consider these helpful points regarding thermostats, if you have any question s be sure to contact a professional HVAC technician or another resource for assistance.

How does the thermostat work?

When your thermostat works through a system of controls that are used to regulate heat systems. There can be a set or schedule temperature that will connect to the to keep a boiler or other heating system at the desired level. With cooling and heating settings you can add desired elements to match with climate temperatures changes.

What is the thermostat used for?

A thermostat is used for switching heating and cooling functions on or off in a property. Essentially the regulation of heat flow will be determined as a transfer of fluid like a coolant to maintain the correct temperature.

What is the best thermostat?

There are several types of thermostats that can be taken into consideration. The best overall thermostat is considered to be the Nest Learning Thermostat 3rd Generation. The best budget programmable thermostat is Lux Products TX500U Universal 5-2 Programmable thermostat. The best Wi-Fi thermostat is the Sensi Smart Thermostat. The best thermostat that is also doubled as a smart speaker is the Ecobee4 Smart Thermostat.

What are thermostat changes?

There have been several updates made to thermostats such as programming a sleep time, a wake-up time and other setting functions. You may be able to create a schedule based on time frames from the week and weekend down to the hour and minute.

Thermostat in Open Area of Home

Types of Thermostat

  • Non-programmable
  • Programmable
  • Wi-Fi 
  • Smart

How much do thermostats cost?

The cost of a thermostat will vary on the brand that’s chosen and any special features. As such the average manual thermostat will cost around $25-$60 with digital programmable thermostats costing around$90-$150 and smart thermostat options costing around $200-$300.

When should I replace my home thermostat?

Your thermostat is recommended to be changed on an as-needed basis or as often as you replace your air conditioner or heater. As such HVAC system typically lasts around 15-25 years.

Who replaces thermostat?

A thermostat that needs replacement can often be done by an HVAC specialist or technician. 

What are the symptoms of a bad thermostat?

A faulty thermostat can exhibit several signs that it is going bad. One such issue is having your AC or heater not turn on, another can be that they are running constantly without turning off. Your thermostat could also be unresponsive without any power functionalities. Another issue could be that the temperature reading and the feel of the room don’t coincide. What’s more, perhaps your HVAC system is short cycling and shuts off too early without completing a full cycle of heating or cooling.

Troubleshooting Tips

If your screen isn’t lighting it could be that there is a thermostat failure. With a battery change yo may be able to resolve this problem as this is often the case. Another instance that could be reflective of weak batteries is improper setting functions. Make sure that the program is set to proper temperatures that reflect the changes of the season. Anything too high in the summer, for example, won’t allow for proper cooling functions. Another fairly simple quick fix could have to do with your circuit breaker, when it trips it’s best to turn it off then back on to reset the setting of your HVAC and thermostat back to normal. Finally, the location of your thermostat can play a hand in odd behaviors. When a thermostat is under direct sunlight is can read higher than actual room temperatures. What’s more, being near a source of open outdoor openings can change the readings as well.

Contact A Professional To Learn More

When you’re interested in a new thermostat or need assistance with repairs be sure to get in touch with your local HVAC experts for assistance. They’ll be able to troubleshoot any inconsistencies or troubles occurring with your thermostat so you can get your heating and cooling settings back on track. What’s more, they can go over different models and feature expansions regarding thermostats that might make future usability more enjoyable. Just as you would search for plumbing services in Pittsburg, CA you may best be able to find reliable thermostat services in your area.

If you’re interested in a thermostat in Redding, CA call (530) 223-1332 with Redding Heating & Air!

Do You Need HVAC Maintenance?

gas furnace and hvac maintenance

Taking Care of and Maintaining Your Investments

Owning a property of any kind is a major responsibility. There are several areas that require your attention making it easy for other areas or appliances to slip through the cracks. The most common appliance that both home and commercial property owners tend to miss is their HVAC system. No matter what kind of heating, cooling, and ventilation system you have, when you need HVAC maintenance in Redding, CA, rely on Redding Heating & Air. We are the experts you need for all your HVAC needs. Dial (530) 223-1332 to get started with an appointment today.

completed hvac maintenance

What is HVAC Maintenance?

This is maintenance and care that you and a licensed technician can perform on your HVAC system to ensure it operates efficiently year after year. Maintenance services include cleaning, repairing, replacement, and other necessary steps. Does an HVAC system need maintenance? It absolutely does! Maintaining and caring for your system will guarantee that it lasts as long as it needs to.

Most HVAC systems have a lifespan between 10 and 15 years. With regular maintenance, you can push your system to last the full 15 years, with minimal breakdowns or unnecessary repairs. Without regular maintenance, your system may fail much sooner and you could be out thousands of dollars for replacement services.

Rather than take the chance that your system will last, your best bet is to rely on system maintenance. For that, you can Redding Heating & Air. We are a dependable HVAC company based out of the Redding area. We provide necessary repair, maintenance, and upkeep services for residential and commercial HVAC systems. We understand that any heating or cooling system is a major investment. Because they are such a large investment, we want to help you get the most bang for your work.

HVAC Maintenance Tips and How-To

While any maintenance and repairs should be completed by a reputable technician, there are several things you can do yourself. As a property owner, any appliance in your space is your responsibility. It’s up to you to take care of and maintain your investments, but you don’t have to do it alone. You can rely on the team with Redding Heating & Air for help with these general tips or with something more serious.

  • Change Filters: One of the best things you can do for your whole system is to change or clean the filters regularly. It’s recommended that you replace them once a month for cleaner air and a safer system.
  • Seasonal Maintenance: Another thing you can do, that will help to take away quite a bit of stress on your part, is to schedule seasonal maintenance. If your HVAC company offers service plans or agreements, consider investing in one.
  • General Cleanup: Taking time to keep the area around your HVAC unit will ensure an efficient operating system. Doing so will make sure that nothing gets sucked up or blown into an area it doesn’t need to be.
  • Clean Evaporator and Condenser Coils: Every now and then, it’s a good idea to clean the evaporator and condenser coils. They absorb a good amount of heat, air, and other particles, so both coils can easily become dirty or clogged.
  • Vent Check: Also make sure to go through your property and check all the vents. Make sure that there is nothing blocking or clogging them. If the covers appear dirty, cleaning them with a damp cloth or with soapy water is a great idea.
  • Programmable Thermostats: A great way to better maintain your entire heating and cooling system is with a programmable thermostat. There are newer ones that offer Wi-Fi control and more, all of which can control when the system is on, off, and more.

When you need any kind of maintenance or repair for your heating and cooling system, give us a call. Redding Heating & Air can help you with all your servicing needs. Our technicians are experienced with every aspect of an HVAC system from the thermostat, to the ductwork, and even to the ventilation. Rely on our team when you need dependable servicing.

Is Maintenance Really Necessary?

So, the question still remains, is HVAC maintenance really necessary? We certainly believe it is. Caring for and maintaining your system will guarantee a lasting and efficient investment. You’ll find there is less of a need for repairs, replacements, and other costly services. You will also likely find that your energy bills are lower over time. That’s because, as mentioned, when your HVAC system is working efficiently, it will need less energy to produce the same effects. In turn, your bills will be lower and you’ll be saving money. HVAC maintenance in Redding, CA is not just suggested, but it’s highly encouraged. When you need help maintaining your residential or commercial system, give Redding Heating & Air a call.

air conditioner and hvac maintenance

Connect With Us Today for More

For more information about HVAC maintenance in Redding, CA, call our team today. We are available 24/7 at (530) 223-1332. A Redding Heating & Air will be happy to discuss services, prices, and more with you! We look forward to your phone call.