Author Archives: Eric Krzywicki

When Is the Best Time to Schedule Furnace Maintenance?

furance maintenance

Maintaining Your Furnace for Lasting Use

For a home, routine residential furnace maintenance is essential for two reasons: Keeping your family warm and safe. When a furnace maintenance is overlooked, the dirt and dust that furnaces attract get thicker, each time the furnace turns on, it heats that dirt and dust. While most it will burn off, what is left can easily catch on fire. Or it can clog up the furnace and not keep your home warm and comfortable. 

What is furnace maintenance?

Furnace maintenance is a preventive step in keeping your home’s heating service in good working condition. It includes a thorough cleaning, inspection, and tune-up of the system. A routine of furnace maintenance will keep your home comfortable while saving money on your energy bills too. 

Do I need annual furnace maintenance?

Yes.  Professional furnace contractors and manufacturers recommend annual inspections and maintenance by a trained professional. What are the benefits of having this done?  

  • Safety: A gas furnace is using a combustion process that must be in precise working order for efficiency and maximum safety. A minor glitch can result in gas leaks or dangerous exposure to high levels of carbon monoxide that can cause serious health issues or death. 
  • Repairs: With routine check-up, cleaning, inspection, and tune-up, you’ll minimize the need for furnace repairs. This annual schedule will catch small issues that can be handled before they become expensive repairs or replacement. It also will assure you that your furnace will be working when you need it.
  • Energy Efficiency: A furnace in good working order will go a long way in energy saving, aka money-saving, including cleaning or replacing the filter each month. 
  • Warranty: When you spend the money on a new furnace, you want to make sure the warranty is honored when needed. Annual professional check-up, tune-up, and maintenance will keep your furnace in warranty condition. 
  • Wire Checks: A professional furnace check-up includes wire checks where broken, corroded, or loose wires are repaired or replaced.  

How do you maintain a furnace?

The best furnace maintenance is to have your routine each month, like changing or cleaning the filter. You realize how important changing the HVAC filter is during the summer, you should realize that the dirt and dust still exist during the winter too. So, the following furnace maintenance checklist will tell you step-by-step how to furnace maintenance.   

Make sure that everything is safe while performing furnace maintenance on a gas-powered appliance. Before you start your furnace maintenance on a gas furnace, turn the HVAC system off. If you smell any gas, stop, and call a professional HVAC furnace technician.  IF there is no gas smell proceed with the following steps: 

  • Check the thermostat to ensure it is in proper condition and operating. If your home hasn’t felt toasty warm when the heat is on, even with routine furnace maintenance, you may need to replace the thermostat. If it is five years old or older, it is time to replace the thermostat. 
  • Clean the blower. The blower is located behind the air filter, and the dirt, debris, and dust the filter misses is attracted to the blower. Remove the filter and panels so that you can reach the blower and with a damp cloth, clean off the belt, pulleys, and the blower to remove any accumulated debris, dirt, and dust. These are essential steps in furnace maintenance.
  • Clean or repair the furnace ducts. A forced-air furnace can damage the furnace ducts, so keeping them clean is an important part of furnace maintenance. You can do this by using a shop vac once a month to clean the ducts, making sure you return the duct covers securely when done. Once a year, calling a professional air duct cleaning service is recommended
  • Clean the vents. Your Gas furnace has a venting system that can become blocked by t debris, dirt, and dust. Not only is it blowing that debris, dirt, and dust through the ducts and your home, blocked vents are dangerous. Clean the vents with a large brush and vacuum the inside of the vents as far back as you can reach. 
  • Fan inspection. Part of your furnace maintenance should be inspecting the fan, which will help you avoid experiencing problems with the furnace when you perform a thorough inspection each month. Once a year, have professional furnace maintenance that includes check-up, cleaning, inspection, and tune-up. 
technician working on furnace

How often should you have your furnace serviced?

In addition to your monthly homeowner service of filter changing, a professional gas furnace should be scheduled no less than once a year. Recommended is twice a year, end of spring and the start of fall, especially as your furnace ages, the more frequent you have it professional inspected and service, the more you can be sure it is in proper and safe working condition. 

When should you clean your furnace?

A monthly routine of filter cleaning or changing is a must to keep your furnace working at the best level possible. For furnace maintenance, an annual or bi-annual professional cleaning, inspection, and tune-up are recommended steps. A professional furnace technician will clean areas of the furnace that you can’t reach yourself. They know what parts can be bumped without causing problems. 

furnace maintenance

Last Few Words

Your furnace is an essential component of your home. Making sure it is proper working order, cleaned and inspected, will keep your home warm in the winter using the least amount of energy, and safely. 

What is Sheet Metal Fabrication Process?

Sheet Metal is Cut on a Hydraulic Press.

What is sheet metal fabrication process?

Sheet metal is used in a variety of industries. In HVAC, for instance, ductwork is often fabricated from sheet metal. Sheet metal fabrication for HVAC uses the same process as any other industry. The process basically involves taking flat sheets of metal like steel or aluminum and shaping them into a variety of products like ducts by cutting, folding, punching, and assembling them. Tools ranging from band saws and chop saws to cutting torches and press brakes (which bend the metal) are used to shape the metal. The products are often assembled through various welding techniques. One of the unique services that Redding Heating & Air offers is sheet metal fabrication in Redding, CA. We can shape a variety of products for you. Find out how we can help by calling 530-223-1332.

What are the types of fabrication?

There are multiple types of sheet metal fabrication ranging from cutting and punching to stamping and casting. Cutting is one of the most common fabrication processes used in a variety of industries. Sheet metal typically comes in long rolls and in order for it to be used in manufacturing a product it must be cut into manageable sections. Machinery used for cutting include lasers and plasma torches. When it comes to fabricating sheet metal for HVAC, folding and bending processes are essential to develop products like ducts and other accessories.

What are the types of sheet metal?

Almost any kind of metal can be used in sheet metal fabrication. Typically, however, most sheet metal is commonly either steel, aluminum, or brass. Each of the metals is often of different grades and a variety of thicknesses, or gauges. The type of metal used will depend on what is being produced and how and where it will be used. Some metals, for instance, are chosen for their corrosion resistance, while others are chosen for strength.

What are the tools used in sheet metal work?

There are a variety of tools used in sheet metal fabrication. For cutting you might require sophisticated equipment like lasers or plasma torches, but you might also use a tool like an angle grinder cutting, grinding, or sharpening, or a throatless shear for straight, curved, or irregular cuts. Tools like a planishing hammer are used to flatten the metal or shape it into fine shapes, while flanges or punch tools are used to punch holes into the material. There are also tools used for shrinking and stretching the metal, depending on what’s needed at the time. Press brakes are commonly used to bend the metal. 

How do you do sheet metal fabrication techniques?

Several techniques are used in sheet metal fabrication. 

  • Assembling: Sections of sheet metal are put together by welding or binding them with adhesives, and bending with crimped seams.
  • Bending: Metal is bent either with hammers or press brakes.
  • Blanking: A part is cut from a larger piece of metal, and the large piece is discarded.
  • Cutting: Sheets of metal are cut or chiseled into manageable pieces using devices like manual power tools or machines like lasers. 
  • Die-cutting: This type of cutting doesn’t rely on forming chips or using melting or burning.
  • Fastening: For thinner metals, fasteners like nuts or studs are used to secure pieces together.
  • Finishing: The surface of a completed metal project is altered to improve aspects like appearance, corrosion or wear resistance, or conductivity.
  • Galvanizing: A protective zinc coating is applied over steel or iron as a part of rust prevention.
  • Punching: Holes or shapes are punched into the metal.
  • Welding: Various types of welds are used to secure pieces of metal together.

These are just a few techniques used to fabricate metals.

Sheet metal fabrication for insulation

In many industrial applications, piping and tubing need insulation jacketing to protect the pipes from wear or moisture or mechanical damage. Sheet metal is sometimes used to create that jacketing. When selecting a material for jacketing you must consider mechanical, chemical, and thermal and moisture aspects. Aluminum sheets are frequently used as jacketing because aluminum is lightweight and corrosion-resistant. Galvanized steel is often used in chemical plants as a barrier against corrosive fumes and chemical leaks.

Sheet metal fabrication and installation

Once a product like ductwork is fabricated it needs to be installed by professionals. Whether the ductwork is for a residential or commercial building, HVAC professionals like those at Redding Heating & Air can install those products. You can always rely on us for expert installation of any HVAC equipment. You can also count on us for sheet metal fabrication and designing customized products for your project.

Sheet Metal Goes Through a Stamping Machine.

Sheet metal fabrication near me

Whether you need custom-made or standard items, Redding Heating & Air has the expertise with sheet metal fabrication in Redding, CA to create reliable products. We offer a full range of metal services and solutions. Find out how we can help or schedule an appointment with us by calling 530-223-1332.

How Do You Fix Ductwork?

ventilation repair

How do you fix ductwork?

When your air ducts are damaged, it can affect the airflow through your HVAC system, and end up costing you money in utility expenses because your system won’t be running as efficiently. Depending on what type of air ducts you have, DIY ventilation repair may be possible. Many homes have flexible ductwork and below are some tips to make minor repairs when you have a tear in flexible ductwork. 

How to repair ventilation ducts:

  • Use a 6-inch section of duct tape to close the center of the rip.
  • Each side of the rip should be sealed with duct tape.
  • Start at the center of the rip and work outward.
  • Once the duct tape is applied, the repair is sealed with mesh placed lengthwise over it.
  • The mesh is covered with duct mastic to prevent cracking after the mastic dries.

While minor repairs like these can be pretty easy, when you’re working with ductwork, you don’t want to damage it further. Instead of risking any further problems, why not call a professional like Redding Heating & Air for ventilation repair in Redding, CA? We offer a full range of HVAC repair services. Find out how we can help by calling 530-223-1332.

Can I replace ductwork myself?

While it’s not impossible to replace ductwork yourself, it’s not advisable. Any misstep in the installation can lead to problems in the long term. If you’re not careful, for instance, when installing flexible duct, it can easily be torn. You can, for instance, accidentally drag it over rough attic flooring and create tears. Metal ductwork can be dented or improperly installed. All of these problems could lead you to need ventilation repair or cost you in energy efficiency, as air flow will be negatively affected.

Should ductwork be replaced after 20 years?

You might have heard people—even some HVAC professionals—that after 15-20 years you need to replace all of your ductwork because it will eventually deteriorate. There is some truth in this, even with metal ductwork, but it may not necessarily mean that all your ductwork needs to be replaced. Your ducts will expand and contract a lot over the years as your HVAC system operates. This expansion and contraction may cause even the sturdiest of metal ducts to loosen over time. While they may not completely pull away from each other, they may loosen enough to create leaks, which wastes energy. Even so, with regular maintenance, including adding insulation around older ducts and air sealing them, you may not need to replace the whole duct system. Some basic ventilation repair and care may be all that’s needed. At the same time, if you are replacing your HVAC system with something more energy efficient you may want to replace your ducts to get the maximum value from the new system.

Can dirty air ducts make you sick?

Dirt and dust can collect and even clog air ducts, especially if any are damaged. Not only can this dirt, dust, and other debris cause problems for your HVAC system, but it can also affect your health. If the dust gets vented out toward the home, those with severe allergies or respiratory issues like asthma can be affected. In general, dirty vents can increase problems with sinus infections or issues like throat irritation or sneezing or coughing. Ventilation repair or cleaning may help alleviate these problems, although one major thing you can do to help keep your vents clean is to change out your air filter or have it cleaned. A dirty air filter can affect air quality and air circulation as much as anything.

How are air ducts cleaned?

If you are having problems with air quality in your home, having your air ducts cleaned may help alleviate issues like sneezing or coughing because dust and debris are removed from the ducts. Duct cleaning is actually a fairly simple process. Usually it just requires the duct cleaning service to inspect the ducts and use heavy-duty vacuums to clear out the dust and debris. The cleaning services will also use brushes inside the ducts to get them cleaned out thoroughly. Additionally, the HVAC unit itself is cleaned. Everything is then sealed back up and you should experience better airflow and air quality as a result.

ventilation repair

Ventilation repair near me

If you are needing home ventilation repair or commercial ventilation repair in Redding, CA, turn to the leading HVAC specialists at Redding Heating & Air. We offer a wide range of HVAC services throughout the area. Your ventilation system can be a key to maintaining proper air flow in your system, which helps it maintain energy efficiency. In the long run, that can save you on utility bills. But good ventilation also benefits your indoor air quality, and may help you avoid some health problems like sneezing or coughing. Find out how we can help or book a service appointment by calling 530-223-1332.

What is done during HVAC maintenance?

Technicians servicing outdoor HVAC units

How long does HVAC maintenance take?

Are you ready for summer? Vacation plans made, swimsuits packed, and all of those essential things? What about your HVAC? Is it ready for the summer? Yes, your HVAC system has been running fine all winter, but the AC part of it hasn’t. Before you head to the airport or pack the camping gear, maybe get a professional residential HVAC maintenance check-up.

The average time is one to two hours if there are no issues. Each HVAC maintenance business has its own residential HVAC maintenance checklist that their technicians are trained and instructed to follow. If the unit needs any service performed, that can extend the time needed to complete the inspection and maintenance. The basic checklist of most residential HVAC maintenance contractors will include any or all of the following:

  • Check refrigerant
  • Test for leaks
  • Evacuate system and capture released refrigerant
  • Check air duct for breaks or leakage
  • Measure evaporator coil airflow
  • Verify the electric control sequence
  • Inspect electric terminals, clean, tighten connections, use a non-conductive coating
  • Oil any motors, check belts
  • Check thermostat accuracy

What maintenance does a central air conditioner need?

The above professional maintenance check should be scheduled twice a year. During the summer months, a homeowner should perform the following:

  • The Filter – This should be replaced or cleaned every 30 days all year long. Filters that are clogged and dirty will reduce the efficiency of the system and what air gets through the dirty filter is blowing into the duct system and throughout the house. Regular changing or cleaning of this filter will keep your system running well in between professional residential HVAC maintenance appointments. 
  • The Coils – The condenser coil and evaporator coil collect dirt while the HVAC air is working. Keeping the filter changed or cleaned as mentioned above will help minimize how much dirt. When the evaporator coil collects dirt, it insulates it and keeps it from absorbing heat as intended. This is one area a professional residential HVAC maintenance check-up includes. 

Besides the inside portion of your HVAC system, the outdoor unit needs your attention. Make sure nothing is blocking it from getting air such as shrubbery, grass, or trash that has blown up to it. Check it weekly to make sure it is clear of any debris. 

  • The Coil Fins – The condenser coils and evaporator coils are aluminum fins that are bent easily. When bent, the airflow is blocked. During your scheduled professional residential HVAC maintenance, the technician will correct this, but in between those appointments, you can purchase a fin comb at any home improvement store and do this yourself following the instructions on the package. 
  • Condensation Drains – If these become clogged, it can cause a lot of problems to the HVAC system and your home’s structure. Each month when you change or replace the air filter, take a stiff wire and push through the drain to make sure it isn’t clogged.  This is another area that the technician will check and clean during your professional residential HVAC maintenance appointment. 

How often should you have HVAC maintenance?

Experts recommend having a professional residential HVAC maintenance and inspection twice a year, once in the fall and again in the spring, and should not be less than once a year in the spring. Even if your HVAC system is operating perfectly, these inspections and maintenance will keep it running perfectly.

Most HVAC service companies offer HVAC residential maintenance contracts at an inexpensive rate. However, regardless of the cost, professional preventive HVAC maintenance is a good investment to get the longest lifespan possible from your unit. 

 technician is checking air conditioner

Are HVAC maintenance plans worth it?

Ultimately, the biggest benefit of having a preventive maintenance plan is that it will keep your unit in reliable condition. When things are in reliable condition, they are less likely to break down, leaving you hot on a summer day or frozen on a winter night. For the sake of review, here are the points in favor of having a residential HVAC maintenance contract with a professional HVAC company: 

  • The decrease in equipment downtime
  • Reduced major repairs, saving money
  • Improved life expectancy
  • Reduced need to replace HVAC unit
  • Improved health and safety for household
  • Adds to the value of a home, especially when you take a transferable contract

When a residential HVAC maintenance is implemented properly, it will result in savings from countless repair calls or replacing parts, or the whole system. Your home is a large investment and the HVAC system is an investment within that investment. Taking care of things like the HVAC system, the roof, and other major components will keep your home comfortable and healthy for you and your loved ones, all making it worthwhile to have a residential HVAC maintenance program on the important components like the HVAC. Call 530-223-1332 today for your HVAC maintenance needs in Redding, CA.

What is HVAC Repair?

Male technician repairing and diagnosing air conditioners. Diagnostics for errors and preparation of a repair plan

Learn More About HVAC Repair

Your HVAC unit and systems will undergo many changes as time passes, as a matter of fact, there will be times that HVAC repair will be necessary in order for your systems to continue to operate smoothly. When there are issues with your HVAC it would be ideal to contact a service professional for help in connection to a qualified HVAC company. There are many specifics found with each unique HVAC system that requires certain protocols to be met in handling it. That’s why it’s important to have a professional service the machine that knows how to work with it. HVAC repair can be a delicate matter, learn a little more about it here before you start on services.

What is the meaning of HVAC?

HVAC stands for heating, ventilation and air conditioning. Essentially HVAC systems comprise of indoor and outdoor units, furnaces, ACs and other units that will provide heating and cooling to properties. HVAC systems are an industry-standard in all property constructions be they for residential or commercial purposes.

How much does it cost to service an HVAC?

An HVAC repair or other services can cost around $150-$450 on average. Most homeowners will spend around $268 on furnace services and $319 on AC services. An HVAC contractor, in turn, can charge hourly rates of $100-$150 and some may even have service call fees from $39-$200 which applies to the first hour.

How often should central air be serviced?

Your central air should be serviced depending on your system’s requirements. At a minimum, it should be serviced once a year yet if you’d like to go for more in-depth care it can have periodic inspections up to 4 times a year.

What does an AC tune up include?

An AC tune-up will commonly include cleaning condenser coils, looking for leaks, tightening and examining electrical parts, checking refrigerant levels, analyzing operations of the motor and blower belt, and calibrating the thermostat.

How often should HVAC ducts be cleaned?

Your HVAC ducts should be cleaned every 3-5 years according to the National Air Duct Cleaners Association. Homeowners should also consider cleaning it every 2-5 years depending on their circumstances according to air duct professionals. 

plumbing tools and accessories on wooden table. top view

Do all AC units have a reset button?

Most AC units will have a reset button on them that are typically red in color and fairly small in size. It will be marked clearly as a reset button as well, however, if you have your doubts your instruction manual should be able to let you know where the reset button is.

How do I reset my air conditioning unit?

  • Shut Down Your AC at the Thermostat
  • Find Your Circuit Breaker Box
  • Reset the Circuit Breaker for Your AC Unit
  • Wait 30 Seconds
  • Turn the AC Thermostat Back On

Why would my outside AC unit stop working?

Reasons as to why your outside AC unit has stopped working can be due to outside fan failures which point towards issues with a bad capacitor. Without this part working properly your AC won’t be able to be powered which means that fans can’t spin. If your fans aren’t turning on than address the capacitor, with other issues consider doing more research or calling for help.

What is the life expectancy of a HVAC system?

The life expectancy of an HVAC system is about 15-20 years yet many people tend to replace them at around 10-15 years. An HVAC can run a long life with proper maintenance which can be more economical in terms of energy bills and maintenance fees.

How many types of HVAC are there?

There are four main types of HVAC systems out there yet there are others that can be of interest. These four are considered hybrid systems, split systems, packaged heating and air systems, and duct-free systems. There are advantages and disadvantages to each type of HVAC system and knowing these factors can help in the decision making the process of what works for you.

Get The Help You Need With an HVAC Company

When your HVAC starts to act up it can be hard to determine what areas need to be fixed. Oftentimes parts can influence the performance of connecting parts so issues can begin to blur. With a thorough inspection from a professional, problem areas can be tackled correctly without confusion. If you need help with an HVAC repair get in touch with your local HVAC company for assistance. An HVAC technician will be able to thoroughly inspect your unit to determine what could be happening with it. Proper HVAC repair can prevent the constant need to readdress an issue that’s been happening repeatedly. Get cost-effective and timely HVAC repairs with the assistance of a qualified HVAC company, learn about your various options today.

When you need help with HVAC repair in Redding, CA call 530-223-1332 with Redding Heating & Air! 

How can we save energy in winter?

house in winter - heating system concept and cold snowy weather with model of a house wearing a knitted cap.

What should you set your thermostat in the winter?

Saving energy in the wintertime can be a very important task.  Some places get very chilly and you may want to turn your thermostat up as high as you can in order to combat the cold.  Fortunately, there are other things that you can do in order to make sure your house is warm in the wintertime, besides costing yourself an arm a and a leg.

Did you know that there is a certain temperature your thermostat should be set to in the wintertime?  A lot of people are unsure, and they ask questions like what temperature their thermostat should be set at, or how cold they can keep it in their house during the winter.  During the winter months, you should not let the temperature of your house fall below 70 degrees and your thermostat should never bet set any lower than 64 degrees.

The best temperature to save energy in winter

One of the best ways to save energy in the wintertime is to set your thermostat temperature to 68 degrees when and leave it alone when you’re in the home.  When you’re away from home lower it to 64 degrees but no lower.  This will ensure that your house stays the proper temperature but will also ensure that your thermostat is not consistently kicking on and costing you money.

Why is my electric bill so high in the winter?

You might be asking yourself; “why is my electric bill so high in the winter?”  This is because your thermostat is making your furnace turn on and off according to the temperature in your home.  The higher the temperature your thermostat is set, and the colder it is outside, the more your furnace will work.                      

What uses the most electricity in your house?

Believe it or not, there are some things that use more electricity than others in your home.  Everything in your home that is plugged into an outlet uses electricity, even if it is not plugged into something.  Leaving a cellular phone charger plugged into your wall without a cellular phone plugged in, still uses electricity.  Unfortunately, the average home electricity usage is mainly used on, you guessed it, heating and cooling.   In fact, here is the list of the average household electric usage:

  • Cooling and heating: 47% of energy use
  • Water heater: 14% of energy use
  • Washer and dryer: 13% of energy use
  • Lighting: 12% of energy use
  • Refrigerator: 4% of energy use
  • Electric oven: 3-4% of energy use
  • TV, DVD, cable box: 3% of energy use
  • Dishwasher: 2% of energy use

How can I save on my electric bill?

Most people know that their electric bill gets higher in the winter, but a lot of people are unsure of how to save themselves money in the wintertime.  There are options that you have to lower the cost of your heating and cooling bill, beyond just keeping your thermostat at a certain temperature.  In fact, there is a list of options that you have to improve your household heating to save yourself money in the long run:

  • Get new windows – Some people have older windows that let air in.  Getting new windows can stop the flow of cold air coming in and warm air getting out.
  • Put plastic over your windows – Even new windows can get leaks and let air in.  Sometimes putting plastic over your windows will help to keep heat in.
  • Make sure doors have seals – Sometimes the seals on your doors can wear.  You should always make sure your seals on your doors are intact.
  • Place towels or air stoppers at the bottom of doors – This can prevent airflow and leakage from the bottom of door frames.
  • Replace your roof – Believe it or not, your roof can also work against the airflow in your home.  Check with a company that does premium roofing in order to get your roof inspected and repaired if needed.
  • Get your furnace serviced – Everyone thinks that you only need to repair your furnace if it breaks down, but there is a lot more to caring for your furnace than you could imagine.  If you do not know much about furnace care and repair then call a company that deals with energy savings.
comfy feet in socks by a fire

Save energy this winter

There are many ways that you can save energy and money over the winter months.  Some of them are costly and some of them are cheap.  No matter which options you choose all will save you money, though the more costly options will save you year after year, rather than for one winter.  Employing every single method that we discussed here is your best option for saving the most energy and money during the winter months that you could hope for. Need heater maintenance in Redding, CA? Call 530-223-1332 today!

How Do You Tell If Your House is Well Insulated?

A Technician Installs Insulation.

How do you tell if your house is well insulated?

If your home isn’t well insulated, no matter how finely tuned your HVAC system is, your home won’t stay properly heated in the winter or cool in the summer. New insulation installation may be required, otherwise energy gets wasted and your energy bills begin to skyrocket. Increased energy bills, indeed, are one way to tell your home may not be well insulated.

Other signs you need more insulation include:

  • Uneven temperatures throughout your house: You may find you have colder rooms in one part of the house, while others are warmer.
  • You have cold walls, floors or ceilings: If you have enough insulation, your walls, ceilings and floors will feel warm and dry.
  • Drafts: In the winter you might find air is getting in or going out through under-insulated windows and doors.
  • Pests like mice and bugs are getting inside: If pests are getting inside, so are drafts, and they are often getting in through doors and windows that need extra insulation.
  • Leaks in the attic: Poor insulation will allow water to get inside the attic.
  • Pipes freezing: If you have poor insulation, when it drops below freezing, there’s a better chance your pipes will freeze.

If you are experiencing problems like these in your home, you may need more insulation. When you want reliable insulation installation in Redding, CA, get in touch with the professionals at Redding Heating & Air. Find out how we can help you by calling 530-223-1332.

What is the best insulation for a new home?

When insulating a new home, you’ll have many things to consider, including where to insulate and the recommended R-values for each area. R-value measures the insulation’s ability to resist conductive heat flow. The higher the R-value, the more effective the insulation. While less expensive insulation like batting have high R-values, you’ll have to install thicker layers that can cost more and be inconvenient or impractical. Climate will also affect the type of insulation you install, but in most areas you’ll want to put in both cavity insulation as well as insulated sheathing with R-values ranging from R-15 to R-21. You might also want to consider products like structural insulated panels that provide both structural support and insulation. In warmer climates you may want to consider roof radiant barriers, reflective insulation, and foundation insulation.

How should insulation be installed?

If you plan to install insulation yourself, you’ll probably use rolled paper-faced batting, which is best for floors and ceilings, as well as roofs with long joists or rafter ball or tall walls. Insulation installation is relatively easy. Below are some basic tips to install insulation.

Insulation installation tips

  • Begin by cutting the roll to fit the framing cavity’s length.
  • For walls you’ll fit the insulation into the cavity from the top or from one end for ceilings, floors or roofs. Do not force the insulation into the cavity. Instead, gently push it inside.
  • Fold the paper flange on one side of the cavity and staple it with staples space about a foot apart. Do the same for the other side.
  • Peel the insulation apart to make two layers to insulate behind pipes or wiring.

Can I put insulation over wiring?

When installing insulation around wiring, extra care has to be taken. You have to fill the space around the wires, but you cannot just shove the insulation against the wires. Otherwise you’ll have an uninsulated gap behind the wires. One option is to slit the insulation in the back to the depth and height of the wires, and then fit the wires into the slit when the insulation is installed. A second option is to separate the insulation’s layers and slide it under or over the wires, or put one layer over the wires and the other and one over it. 

Insulation installation in attic

Insulation installation will vary depending on whether the attic is finished or unfinished. When you’re insulating an unfinished attic, the objective is to seal the attic from the main living space. You’ll want to fill all of the area between and over the floor joists, including the attic hatch. In addition, you’ll insulate any duct work so heat loss and gain will be reduced.

If the attic is finished out as a living space, the insulation will be installed between the ceiling rafters and exterior wall studs. The floors can remain uninsulated. With a finished attic you can either remove the drywall or paneling covering ceilings and walls to install the insulation or you can drill holes between the studs and rafters to blow in insulation. You can also add insulation whenever you replace your roof. 

You may have to replace attic insulation that’s been damaged by a roof leak. If you have a roof leak or other roof damage, a roofing professional might be able to give you roof insurance claims assistance so you get full benefit of your claim.

Insulation installation in walls

If you have an older home, it’s possible the walls are not insulated, which can put a strain on your HVAC system. More often than not, however, you’ll have to remove the drywall if you plan  to install insulation in the walls, especially if the insulation is traditional roll insulation. You do have other options, including installing injection foam or loose-fill insulation. While you won’t have to remove all the drywall, you will have to open holes in the wall that will need to be patched later on. Some insulation like loose-fill insulation may settle over time, which causes hollow spaces.

How much does it cost to have insulation installed?

Costs will vary on insulation installation. Much will depend on the type of insulation you use. Blow-in insulation will cost around $500, for instance, if you do-it-yourself, and anywhere between $1,500 and $2,000 for a professional to tackle an average 1,500 square-foot home. Fiberglass batts are the most common insulation used and costs about $0.64 to $1.19 per square foot, so for 500 square feet you could spend up to $200 to do it yourself or as much as $500 to have a professional install it. You also have the option of installing spray foam insulation, which comes in two styles, either open cell or closed cell. Open-cell costs about $0.35 to $0.55 per board foot, while closed cell costs $1 to $2 per board foot.

house attic under construction mansard wall insulation with rock wool

Insulation installation near me

When you need new insulation in your home, you can rely on the professionals at Redding Heating & Air for expert insulation installation in Redding, CA. We offer a full range of HVAC services. Give us a call at 530-223-1332 to find out how we can help you.